Postby NorthernHurricane7 » Mon Jul 23, 2012 2:39 pm
I stretched the spring on the mag (a midcap) and put a piece of plastic on the front of the spring because it was coming out of the loading/BB passage hole. It works way better now and feeds way better. I also took a dremel to the front of the air nozzle and shaved it down a tiny bit. I think this helped the feeding issue too. So for now, it works fine. If the owner gets an 11.1 there will probably have to be a little more work done on it, but as long as it works, hey, it works.
EDIT: Apparently the hop up unit wasn't situated quite right and now it feeds really well on mids and just ok on a P90 box mag.