-M249-
Gearbox Shell- Custom (M249 ONLY)
Gears- V2 and V3 Standard
Bushings- Custom
Cylinder- Standard
Cylinder Head- V2
Air Nozzle- M4/M16 type.
Piston- Standard
Piston Head- Standard
Motor- Short Shaft
Trigger Contacts and Wiring- Custom
Anti Reversal Latch- V2 and V3 Standard
Tappet Plate- At the time this is unknown.
Spring Guide- V2
Also, H-Nubs SCS nubs and the like are not compatible, it uses a standard nub and it goes in vertically, so even if you put in a H or SCS, it will not work.
-Echo1 Master Series MP5-
Gearbox Shell- Modified V2
Spring Guide- V3
This is not the gearbox, but I should let you know.
HopUp Chamber- Custom, very similar to a Marui style AK HopUp chamber, so with very little modding you could get one to work.
Everything else on this gun is standard, as far as I can tell.
kc7655 wrote:g&g cm m4
custom arl
custom cylinder
everything else should be normal
epic skills wrote:AGM mp40
modified v3 gearbox shell
short shaft motor
standard piston
standard cyllinder
version 3 cyllinder head
version 3 tappet plate
not sure about air nozzle... gotta check
proprietary hopup (AK style, but different...)
v2/3 gears
v2/3 AR latch
6mm bushings
v3 spring guide
uhh gotta check trigger contacts too...
proprietary selector plate
v3 cutoff lever
electrical switch on bottom of pistol grip for safety
I dunno if I forgot anything, I have to check
Here's a layout of a Version 2 gearbox.
