As all P90 users know, it's a bit hard to get a sling for it without having to buy a front sling adapter, or a $30+ sling. I had an old 3-pt sling from my sniper rifle laying around, so I created a quick P90 sling out of it. It only takes about 5 minutes to do.
Materials
- P90 Gun
- 3 Pt Sling
- Safety pin (or needle + thread)
1. Grab the 3-pt sling and pull the adjusting clip all the way down, but leave about 3-4 inches of sling left.
2. Bring the loose end clip that's on the large loop you made all the way down, then grab the extra sling and pull it around the mag and back grip. Now, clip it to itself.
3. Now, pull the loose end clip up about 3 inches, then bring the sling together and pinch it together. Now, put a safety pin about 1/4 inch above the end clip. If you want, you can sew the sling together instead.
4. Now, wrap the big loop you created in step 1 around your neck and shoulder. The sling is done.