Moderator: ASGI Tim
ltrazak wrote:I'll throw mine up:
Base: G4-A2 Flaming hog
Magpul MOE pistol grip
Pro-Arms mock suppressor
Fenix TK12 R5 flashlight w/ pressure pad
EA EoTech 556 replica
G&P slim rail guards
Gaurder external battery pouch
SHS High Torque motor, JG gears, G&P 8mm bearings, Azimuth piston, Element POM piston head, sorbo padded cylinder head, king arms nozzle & tappet plate, systema m100 spring, 16awg wiring and SW-Cheetah 2N.
ltrazak wrote:1.) I cant find how to remove my crane stock
On the stock, pull on the entire level and shift the stock off the buffer tube.
2.) Did you have to modify the LE stock for you wire to get through?
I actually did not run the wires through the buffer-tube. If you look at the second picture closely there is a wire coming out the back of the body into the battery bag. I dremelled a channel through the sling adapter to run 2x 16awg and 2x 20awg wires to the gearbox.
3.)Can your stock go to the lowest point or does it get stuck like the stock crane stock
Yes, the stock can be fully retracted. I actually have Magpul CTR stock on there now
ltrazak wrote:I use black zip-ties to secure it to the stock. I'm a righty shooter so the pouch is on the opposite side of the stock from my cheek. Even when I shoot lefty the pouch does not interfere with my cheek weld. With a crane stock I think it would be more bulky and would definitely interfere with weak side shooting.
I'll throw up more pics later tonight on the wiring.
Users browsing this forum: No registered users and 4 guests